Top
This page describes the syntax and how to use the top command.
To go to the top command, press and hold 
and Flash on the console.
Description
Section titled “Description”With the top command you can jump to the top of a cue list from an executor
- directly
- with fade time
The first cue of the cue list will be executed.
The top command is basically a Goto command.
Syntax
Section titled “Syntax”1. Jump directly to the top of a cue list from an executor.
Top Executor 1
2. Jump with fade time to the top of a cue list from an executor.
Top Executor 1 Fade 3
Example 1
Section titled “Example 1”Let´s assume you will jump directly to the top of a cue list from the executor 1.
To get a dimmer output, make sure that the fader of an exutor is not at 0 %.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash (=Top) and the respective executor button 
.
b) Press + Flash (=Top) Exec 1 Please.
c) Press + Flash (=Top) and tap on the respective executor in the executor bar view.
The first cue of the cue list will be executed.
Example 2
Section titled “Example 2”Let´s assume you will jump to the top of a cue list from executor 1 with the fade time of 3 seconds.
Press + Flash (=Top) Exec 1 Time (=Fade) 3 Please.
The first cue of the cue list will be executed with a fade time of 3 seconds.