SnapPercent
This page describes the syntax and how to use the SnapPercent command.
To go to the SnapPercent command, it is necessary to press another function key before, e.g. Store and then five times Time.
Description
Section titled “Description”With the SnapPercent command, you set a snap time.
The snap time is a delay time for non fading parameters, eg. gobo or colorwheel.
Syntax
Section titled “Syntax”1. Store a cue with a snap percent of 4 %.
Store Cue 1 SnapPercent 4
2. Assign a snap percent to an existing cue.
Assign Cue 1 SnapPercent 4
Example 1
Section titled “Example 1”Let´s assume, you will store a new cue 1 on executor 4 with a snap percent of 2.
There are three ways to do this:
a) Press Store 1 (= Cue 1) Exec 4 five times Time (= SnapPercent) 2 Please.
b) Press Store 1 (= Cue 1) five times Time (= SnapPercent) 2 and press the respective executor button 
.
c) Press Store 1 (= Cue 1) five times Time (= SnapPercent) 2 and tap on executor 4 in the executor bar view.
Cue 1 is stored on executor 4 along with a snap percent of 2.
Example 2
Section titled “Example 2”Let´s assume, you have stored cue 1 on the main executor and now you will add a snap percent of 2.
Press 
+ Label (= Assign ) 1 (= Cue 1) five times Time (= SnapPercent) 2 Please.
The snap percent of 2 is assigned at cue 1 on the main executor.
Double check the assigned snap percent in the cues view.